cancel
Showing results for 
Search instead for 
Did you mean: 

Automatic gateway detection with Client isolation

lienmonden
New Contributor II

Hi pack,

Can someone explain how the automatic gateway detection works when you use client isolation? I have an end customer where this is not working: Clients who connect to the BYOD SSID with client isolation enabled + isolation whitelist with automatic gateway (default) cannot connect. When we disable client isolation, it works...

Thanks!

kind regards,

Lien

1 ACCEPTED SOLUTION

lienmonden
New Contributor II

FYI: it seems to be an issue with the gateway that has no private IP address (IP addr = 192.32.x.x). I tried on the same device with a proper private IP address 172.16.x.x and now it works!

View solution in original post

2 REPLIES 2

lienmonden
New Contributor II

FYI: it seems to be an issue with the gateway that has no private IP address (IP addr = 192.32.x.x). I tried on the same device with a proper private IP address 172.16.x.x and now it works!

syamantakomer
Community Admin
Community Admin

Hi @lienmonden,

Glad to know that you were able to find the solution.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn