Thank you for the response and the information you shared.
As I see from the picture you shared, seems like the ethernet cable which is coming from the Router or Modem/Router combo is plugged into the wrong port on the Switch panel. It must be plugged into any 1 in-12 ports as shown in the below screenshot. Please unplug the ethernet cable and plug it into the correct port and try again.
AndSometimes the Switch may require a hard reboot (disconnect and connect the switch from the power outlet). Also, Unplug and plug the Access Points ethernet cables from the Switch ports panel and plug them back again.
Please check and let me know if you have any queries in this regard.
We may need to check the Switch ports PoE information from the CLI access. To check the same, please follow the below steps and help us with the output of the CLI commands mentioned in this post below.
Please follow the below steps and help us with the queries,
1. To check this issue, we must identify the ‘current’ IP address assigned by your local router to the Switch ICX-7150-C12P
I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.
How to find my Ruckus “Devices IP address” using free applications: