Wired Ethernet Connection Self-Assigned IP Issue

[stu1720]

I have an ICX 7150-C12 switch in my home with multiple VLANs set up.

For the 1:DEFAULT-VLAN, I have one port 1/1/4 Untagged that has been added. This port is connected to one of the two ethernet wall ports in my home office. I set this up, so I could wire connect to the switch/router/APs when I wanted to make changes on their respective browser based interfaces.

Whenever I physically connect my computer (MacBook Pro M3) to the 1/1/4 wall port, the computer self-assigns the IP and no internet or switch/router/APs connection is made. (I can connect to the interfaces using the wireless WLAN that is tied to VLAN 1.)

I have the second ethernet wall port (1/1/7 Untagged) in my office connect to my “everyday use” VLAN and when I connect to that ethernet wall port, everything works fine. When I moved 1/1/7 Untagged over to 1:DEFAULT-VLAN, the computer again self-assigns the IP and does not work.

Any ideas on what I might have configured wrong?

(For what it is worth, I use an Edge Router 4 as part of my setup.)

[Imran_ruckus · Accepted solution]

Hi @stu1720 

Thank you for your response.

We are pleased to hear that the issue has been resolved and that you were able to find a solution. 

We truly appreciate your time and patience throughout this process.

Thank you again for reaching out to RUCKUS Lennar Home Community. 

Should you have any further questions or concerns, please do not hesitate to contact us.

Wishing you a wonderful day ahead!

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.