CommScope RUCKUS Community Forums

stu1720 · 03-09-2025

I have an ICX 7150-C12 switch in my home with multiple VLANs set up.For the 1:DEFAULT-VLAN, I have one port 1/1/4 Untagged that has been added. This port is connected to one of the two ethernet wall ports in my home office. I set this up, so I could ...

stu1720 · 02-06-2023

I have a ICX 7150 Switch running firmware SPS08090dufi.bin. Is the correct firmware upgrade path: SPS08092dufi.bin --> SPS08095dufi.bin --> SPS09010dufi.bin?

stu1720 · 03-12-2025

In running the requested switch CLI and reading through it, I realized that the untagged ports for the router and APs had been assigned to the wrong VLAN. Moving them back to 1:DEFAULT-VLAN solved my issue. I sincerely appreciate your help and effort...

stu1720 · 03-11-2025

I apologize for not doing that. Just to clarify, do you want the command line for the switch or router?

stu1720 · 03-11-2025

Thank you for your write up.My router/switch/APs are all on the 192.168.1.0/24 range.On my EdgeRouter, the 192.168.1.0/24 range is associated with the below interface:DHCP is setup as follows: On the ICX 7150-C12 switch, the VLAN is setup as follows:...

stu1720 · 03-10-2025

Yes, this is a Lennar Ruckus setup. The home included an ICX 7150-C12 switch and two R510 APs.

stu1720 · 02-06-2023

Thank you for the very detailed reply!

CommScope RUCKUS Community Forums

User Statistics

User Activity

Wired Ethernet Connection Self-Assigned IP Issue

Firmware Upgrade for ICX 7150

Re: Wired Ethernet Connection Self-Assigned IP Issue

Re: Wired Ethernet Connection Self-Assigned IP Issue

Re: Wired Ethernet Connection Self-Assigned IP Issue

Re: Wired Ethernet Connection Self-Assigned IP Issue

Re: Firmware Upgrade for ICX 7150