Wifi for ruckus is freezing and slowing up after power outage

[CK]

After a power outage the internet is now working slower than before. It freezes up. Was running fine before. We have reset entire Ruckus box by unplugging. Also reset the boxes on each of the 3 floors in my house and still nothing has worked. What can we do? I was going to go best buy and just another wifi extender. Any thoughts?

[Vásquez_Fer]

Hi @PeterK 

Have you fixed the primary issue ( routing code  issue ) ? that you were presenting.

Since you already know the IP address : 

How to remotely access to 'ICX 7150-12P' or 'access points' "Network devices"

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-IC...

Admin usernames and passwords for the Ruckus Wi-Fi Access Points/Switch for Lennar home users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Admin-usernames-and-password...

How to Fix Routing code issues on Lennar Home users

In simple words write the following commands once you are log in the CLI :

ICX7250-24P Router>  

ICX7250-24P Router>enable

ICX7250-24P Router#copy flash flash secondary

ICX7250-24P Router#boot system flash secondary yes

enable
copy flash flash secondary 
boot system flash secondary yes 

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-solve-the-routing-cod...

Best Regards 

Fernando Vasquez 

[PeterK]

 I do all that. It works and then eventually times out. Any help.

[Vásquez_Fer]

Hi @PeterK  ! 

Can you log in and run the following commands copy and past it here :

enable

show flash 

show version 

show ip ssh config

What you mean times out  ' TFTP time out ' ? 

Best Regards 

Fernando Vasquez 

[PeterK]

It's saying "ICX7150-C12-Switch" and "SPS08090d" now. Holy **bleep**ing **bleep** I think I did it.

If the dashboard switch looks like this, it means it's fixed right? Is there anything else I need to do?

[Vásquez_Fer]

Hi @PeterK 

Please keep proper language 

Most of the time adding the ICX - 7150-C12p to the unleash dashboard takes some time as it is necessary to exchange databases or data  between access points and ICX in order to sync the information.

Great to see you did !  Nothing to do on your end ! 

Use a power protector or UPS for power outages

Best Regards 

Fernando Vasquez