02-23-2024 11:36 AM - edited 02-23-2024 11:38 AM
I believe I have encountered SPR issue (for the second time) due to recent power outage. I am attempting to follow instructions listed here, however, when inputting my IP address into my web browser my interface does not match that of the instructions so I am at a standstill as I'm unable to find the proper screens to make a change and correct the routing issue. See below what I receive upon inputting my IP address - closely resembles the Ruckus mobile app.
02-24-2024 10:14 AM - edited 02-24-2024 10:21 AM
So I was able to get in via CLI and it appears perhaps this isn't a SPR issue after all. See below screenshot as both list SPS rather than SPR. Does everything look normal here? I'm still having issues where my signal/WAPs are rebooting sporadically.
02-26-2024 04:34 AM
Hi @adambach89
Greetings!!!
Thank you for the response and the update.
As your Switch is on an older 08080d non-UFI version, we suggest you upgrade the Switch to a recommended stable version.
Please refer to the below RUCKUS Lennar Knowledge base self-help guide for the upgrade process.
Please let me know if you need help at any point during the process.
Thank you again. We appreciate your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
02-27-2024 05:20 AM
Hello @adambach89
Don't forget to reload the unit in order to initiate the correct firmware version. Execute the following command: 'reload' and then press 'y' to confirm.
Best Regards
Fernando Vasquez