There was a power outage this afternoon and once everything rebooted the Ruckus units throughout the house (all three) are not working, all five of the lights are off, no green, red or amber. The ISP started right back up and is working fine and the main Ruckus component that the ISP router connects to directly appears to be on, as there is a green and amber light glowing currently. I've tried reading a lot of these forums and other troubleshooting methods with no success.
Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.
1.Upgrade a Switch ICX-7150-C12P using a USB flash drive
Appreciate the reply. I tried the factory reset multiple times with no success. Regarding the steps to do the software recovery this is an incredibly technical and large ask that is frankly above my skill set. I work from home and need this fixed immediately. Is there anyway I can get on the phone with someone to walk me through this? Going off all the requests on the forum this is very clearly a huge issue that occurs often after power outages, I would hope there would be a more user friendly approach to fixing or someone at least willing to help.