Ruckus ICX 7150-C12P will not power on

[LarryN]

Our ICX 7150-C12P died yesterday. All of the WAPs connected via PoE to this unit do not have power either. This happened a couple weeks ago and the issue was resolved by cycling the power off and on. However, it is not working this time. When I cycle the off and on now, the green lights will blink one time and remain off. No data lights or any other lights come on after that. There's a post that has the same exact issue I have posted here:  https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Ruckus-ICX-7150-C12P-does-no...

This post also shows exactly what my unit does when I plug it in here: https://gfycat.com/coolflimsybushbaby

Please help.

[Jayavidhya]

Hi @LarryN 

Greetings of the day,

- Please let us know the LED status of the switch and the access points using the below guide.

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498...

RUCKUS LED lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D...

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

[LarryN]

Hello @Jayavidhya,

All LED lights on the switch and all 3 WAPs are off/black.

[Jayavidhya]

Hi @LarryN 

Thanks for your response.

Please share the image of the switch and the access points showing the LED status.

Also make sure the cable is actually connected to the ICX-7150-C12P ( Switch ) In one of the 12 ports in the middle

Make sure the cable is in good condition so that both ends and connectors look good.

Here I will leave a short guide how to connect the devices properly : 

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

[LarryN]

Hello,

Here are the pictures. Please note that this setup/configuration (cables, etc.) have remained untouched and unchanged since Lennar’s original install. 

FrontConnection - No LightsLower Level WAPMiddle Level WAPUpper Level WAP

Regards,

Larry