Ruckus 7150 POe stopped working after internet outage. i am connected to console using rj

[melinda]

Ruckus 7150 POe stopped working after internet outage. i am connected to console using rj what are the commands to get into and turn on the POE I suspect they shut off. Already tried reseting box. This site is hard to find anything of value to direct search. Please just link me to steps to enable.

[Yarenis]

Hi @melinda 

Thanks for the details provided, let me add the commands:

Note: confirm if in the show poe in the admin status if off, follow up the next commands after that, if not provide the show logs in case there is a failure.

-Check commands:

enable

show poe

-Configuration steps:

configure terminal

interface ethernet 1/1/1 to 1/1/12

inline power

write memory

Best regards,

Yarenis Hernández

Technical Support Engineer | L2 TAC Wired

[melinda]

do I need to power cycle something after starting the poe on ruckus? if so what is next step?

[melinda]

Im connected but getting an error in Putty.

[melinda]