cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus 7150 POe stopped working after internet outage. i am connected to console using rj

melinda
New Contributor

Ruckus 7150 POe stopped working after internet outage. i am connected to console using rj what are the commands to get into and turn on the POE I suspect they shut off. Already tried reseting box. This site is hard to find anything of value to direct search. Please just link me to steps to enable.

12 REPLIES 12

Yarenis
Moderator
Moderator

Hi @melinda 

Thanks for the details provided, let me add the commands:

Note: confirm if in the show poe in the admin status if off, follow up the next commands after that, if not provide the show logs in case there is a failure.

-Check commands:

enable

show poe

-Configuration steps:

configure terminal

interface ethernet 1/1/1 to 1/1/12

inline power

write memory

 

Best regards,

Yarenis Hernández

Technical Support Engineer | L2 TAC Wired

do I need to power cycle something after starting the poe on ruckus? if so what is next step?

 

melinda
New Contributor

Im connected but getting an error in Putty.

melinda_0-1670883538175.png

 

melinda
New Contributor

melinda_1-1670883564675.png