cancel
Showing results for 
Search instead for 
Did you mean: 

Reset 7150, lost connection with AP r510

AliT
New Contributor II

I factory reset my ruckus 7150. I have a sticker on it that gives from Lennar wifi name and password and admin name and password. The APs are now broadcasting Recover.me-xxxxx. I think I need to log into the AP and turn off mesh? What is the password? I tried ruckus-admin, ruckus-Lennar, the serial number,  and ruckus-<serial number>. I can't figure out the password,  is it based on the connected 7150 at all? I don't know what ruckus-<password> means when I read through this forum.

1 ACCEPTED SOLUTION

AliT
New Contributor II

I'm not really sure how I got it working, but I did, ha. I configured it over my laptop and the WLAN I created finally showed up, and I see both APs and both are transmitting data. Whew. Thanks for the help and quick responses!

View solution in original post

11 REPLIES 11

raymond_jender
New Contributor II

Try super/sp-admin

Jayavidhya
Moderator
Moderator

Hi @AliT 

 

Greetings of the day,

 

Please provide the detailed description of the issue.

 

Please let us know the LED status of the switch and the access points using the below guide.

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498...

 

RUCKUS LED lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D...

 

 

For factory reset please try the most common username and passwords ( This is key sensitive so please include capital letters )  

Username:admin password: Ruckus! 

Username:admin password: Ruckus1

Username:admin password: Lennar

Username:super password: sp-admin

Admin usernames and passwords for the Ruckus Wi-Fi Access Points/Switch for Lennar home users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Admin-usernames-and-password...

 

 

Best regards,

Jayavidhya

Lennar Home Community
 

AliT
New Contributor II

The power led is flashing green, ctl is solid green . These are not working Ruckus1, Ruckus! ( not enough chars) or super/sp-admin. Serial number not working.  What does it mean that I reset the switch? Did I lose the lennar defaults?

Hi @AliT 

 

For detailed understanding of the issue, please let us know the LED status of the switch using the below guide.


RUCKUS LED lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D...

 

 

Best regards,

Jayavidhya

Lennar Home Community