Issue with Ruckus ICX 7150 Switch

[Eldude65]

Good morning. I have the same issue and attempted to follow the instructions. However, I cannot find my switch's IP address at all when using the advanced IP scanner. When looking on the Unleashed Dashboard, as well, the switch has no IP address. I took a screenshot of the original IP address, but cannot connect or ping it as it is unreachable.

[Imran_ruckus]

Hi @Eldude65 

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community. 

We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.

Based on the information provided, it appears that you are encountering issues with accessing the RUCKUS ICX-7150-C12P Switch as you cannot find its IP address.

We apologize for any inconvenience this has caused and are committed to assisting you promptly.

If you are unable to get the IP address of the Switch, please try getting console access to the Switch.

Here is a guide on how to access to the Switch via console (cable access between your PC to the ICX 7150-C12P) in this case we need a USB type C to USB standard OR Console cable Rj45 to USB (Any one cable- please refer the guide)

How to console in the ICX-7150-C12P

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-71...

Please let me know once you are able to get the console CLI access please help me with the below commands. 

enable
show version
show flash

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding. 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.