ICX7150-C12 & R510 Access Point Wi-Fi speeds with AT&T 1Gb Service

[steved1951]

As an update to my previous post, here is more information.

We purchased a Lennar home in the Folsom Ranch community in Folsom, CA, in July of 2019. The house was outfit by Amazon as a “smart home” that included the Ruckus ICX7150-C12 switch and two R510 Access Points. In addition to this, we contracted with AT&T for 1GB Internet service delivered over fiber to a BGW210-700 Internet router. 

The switch is connected directly to the router over Ethernet, and the switch is connected to the two WAP’s, also via Ethernet. The download speed at the router is 884 Mbps. The download speed at the Ruckus Switch is 831 Mbps.

Since Lennar failed to wire the house with Ethernet, other than the wiring from the Switch to the WAP’s, all other traffic is delivered via the two WAP’s – one on the first floor ceiling and one on the second floor ceiling.

Wireless signals within the house measure as high as 425 Mbps and as low as 250 Mbps, depending on line of site and location from either of the two WAP’s. The office on the first floor which contains the two high-end laptops, which happens to be down the hall and in another room, measures one of the lowest speeds at 261 Mbps.

With the advent of smart-tv’s and streaming devices, download speed in other areas of the house, like the family room, loft, etc., is as important as the office location.

The basic question is: what is the fastest speed that the R510 is capable of, and is there any alternative for reaching places that out of the line of site? Are there alternatives to the R510 that could produce higher WiFi signals throughout the house?