CommScope RUCKUS Community Forums

LennerHelp · ‎07-09-2023

Hi. My Ruckus ICX7150-C12 is booted with Router firmware and I cannot get it to flash to Switch firmware. I read all the post and tried to flash the primary firmware and it looks like file was corrupted. I saw instructions to download and overwrite the primary firmware here Solved: RUCKUS Forums - Re: Ruckus ICX 7150-C12P - Page 9 - CommScope RUCKUS Community Forums (rucku... but I received error code 5 when trying to download using below both commands:

copy tftp flash 10.176.220.51 SPS08095hufi.bin primary

copy tftp flash 10.176.220.51 SPS08080f.bin primary

Imran_ruckus · ‎07-10-2023

Hi @LennerHelp

Greetings!!!

Thank you for the response and the information you shared.

This may be because your switch may be running on the Routing code (SPR). The Switch should run on the Switching code (SPS) to avoid these issues for Lennar home users. Due to a power outage/power spike, the Switch boots up on the other partition which may be running on a ‘Routing Code’ results in causing this issue.

As I can see from the output you shared, your Switch may be booted up on the secondary partition which is running on Routing code (SPR) as highlighted in the below screenshot.

Please Enter the below commands in CLI to fix this issue:

Note: Hit Enter to accept each command

enable

copy flash flash secondary

boot system flash secondary yes

Example:

VIDEO LINK AS REFERENCE: https://www.youtube.com/watch?v=Eem1IBgYaWc

ICX7150-24P Router>enable (hit enter to accept the command)
ICX7150-24P Router#copy flash flash secondary (hit enter to accept the command and wait: until the flash finished)
ICX7150-24P Router#boot system flash secondary yes (hit enter to accept the command: the switch will reboot)

Please check let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

View solution in original post

Jayavidhya · ‎07-10-2023

Hi @LennerHelp

Greetings of the day,

Thanks for your detailed description.

To solve this issue please run the following commands on your command line 'CLI'

ICX7150-C12 Router>

Note: Hit Enter to accept each command

enable

copy flash flash secondary

boot system flash secondary yes

For example:

ICX7150-24P Router>enable (hit enter to accept the command)
ICX7150-24P Router#copy flash flash secondary (hit enter to accept the command and wait: until the flash finished )
ICX7150-24P Router#boot system flash secondary yes ( hit enter to accept the command : the switch will reboot )

How to Fix Routing code issues on Lennar Home users via CLI

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-solve-the-routing-cod...

Or WEB access option

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

Please share the screenshot of the error you are getting while following the steps.

Best regards,

Jayavidhya

Lennar Home Community

LennerHelp · ‎07-10-2023

Wouldn’t flashing secondary just update the firmware to SPR(router) firmware and not switch firmware?

Jayavidhya · ‎07-10-2023

Hi @LennerHelp

Please share the screenshot of the error you are getting while following the process.

Also to check the switch status please share the output of the following commands.

Enable

Show version

Show flash

Please let us know if you have ay queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

LennerHelp · ‎07-10-2023

it appears that I do not have permission to post image. Can you help provide permission?

CommScope RUCKUS Community Forums

RUCKUS ICX7150-C12-Router > Need to flash to Switch