cancel
Showing results for 
Search instead for 
Did you mean: 

New Router to connect to Ruckus

Rossana40
New Contributor

I got a new router from Verizon in hopes that it would improve the internet issues in my town home.

The router is installed but will not connect to Ruckus. The Ruckus is still connected to the old router.  Can you please help.  I have tried everything.  I have called seemed to get no help.  Its been not working correctly, and Im out of ideas.  Can you please give some guidance of a phone call to walk me thru steps to fix this issues

1 REPLY 1

Yarenis
Moderator
Moderator

Hi @ Rossana40

 

Take into consideration that the Access Points connectivity depends on the ISP router, so the new router must be connected to the ICX 7150 Switch, I will add a guide, so you can check some examples for the connections, now if you have confirmed that the connectivity coming from the ISP router, however when you are connected to the Wi-Fi coming from the Unleashed Access Points the connection it's too slow, it looks like your Switch (ICX7150 Switch) may be booting from the wrong partition, let me add the guide to fix the issue.

 

Note: if you have access to the Unleashed Dashboard and the Switch can be seen from there, it may look like the following image, ICX7150-C12-Router instead of ICX7150-C12-Switch, now before starting the steps of the guide, I will advise you to cable the computer directly to the Switch since you will have better connectivity than if you connect via wireless.  

 

1:Check the connections:

 

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

 

2:IF all is connected properly but the connection to the Unleashed access points is slow, however, the ISP router works fine, please follow up on the next guide.

 

How to Fix Routing code issues on Lennar Home users via Web GUI.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

 

 How to Fix Routing code issues on Lennar Home users via CLI

 

Guide#1:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

 

Guide#2:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-solve-the-routing-cod...

 

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired | Lennar Home Community