cancel
Showing results for 
Search instead for 
Did you mean: 

My Smart home system is not working such as no doorbell

Ariel2023
New Contributor

My Smart home system is not working such as no doorbell (ring) but Ruckus unit has green lights. I need help please. thank you

26 REPLIES 26

Dar
New Contributor

Screen Shot 2023-10-11 at 7.14.40 PM.png

Screen Shot 2023-10-11 at 7.14.27 PM.png

hi @Dar 

Would you kindly relocate the cable from port #4 to any available empty port? 

What was the result? After relocating the cable could you please share with me again the commands show inline power and show inline power detail? 

Additionally, please access the CLI, and execute the following commands and provide the resulting output:

(Note: Press Enter after each command)

ICX7150-C12 Switch>enable 
ICX7150-C12 Switch#show version
ICX7150-C12 Switch#show flash 

Copy and paste the results on the chat (here)


Kind regards,

Sofia Gätjens

Dar
New Contributor

IMG_1578.jpeg

hi @Dar 

Thank you for the information. 

Did you follow the 1st step suggested? If not, could you please try?

--->> Would you kindly relocate the cable from port #4 to any available empty port? 

What was the result? After relocating the cable could you please share with me again the commands show inline power and show inline power detail? 

Copy and paste the results on the chat (here)


Kind regards,

Sofia Gätjens

Dar
New Contributor

Here's the new results after relocating the cable from port #4

IMG_1660.jpeg

IMG_1661.jpeg