cancel
Showing results for 
Search instead for 
Did you mean: 

Looking for Dashboard URL link

rajivnandra
New Contributor

I need to access the URL to make the required configuration changes hence please provide the URL.

Regards/Rajiv

 

1 ACCEPTED SOLUTION

Hello @rajivnandra ,

Thank you for the response.

Really apologize for the confusion.

You may directly upgrade it to the 200.15.6.212.14 through the online upgrade option.

Please follow the below RUCKUS Lennar Knowledge base self-help article which will help you to upgrade the Ruckus AP to a recommended version

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Upgrade-process-of-the-RUCKU...

Please check and let me know if you have any queries in this regard. 

Thank you again for your patience and understanding.

 

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

View solution in original post

18 REPLIES 18

Hello @rajivnandra ,

Greetings!

Thank you for sharing the screenshot.

From the screenshot you shared, it seems that the Ip address you used to login is of the ICX-7150 Switch, and not of the Unleashed AP.

Once you access the IP address from the IP Scan results, to confirm that the IP address is associated with the Unleashed AP, you should observe the Unleashed login Dashboard, which should be visible upon accessing the appropriate IP address, as illustrated in the screenshot below.

Once you see the above dashboard, please try to use the default combination credentials as mentioned below.

 

I recommend cross-checking the IP addresses listed in the IP scan results under the names "Ruckus Wireless" or "Brocade Communications" to identify the correct IP address of the Unleashed Access points.

Please let us know if you have any queries in this regard.

Thank you again for your patience and understanding.

 

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Thanks, Pinky as now I can get into Unleashed AP. One question, as of now my R510 firmware is on 200.8.10.3.278 whereas the most current firmware version is 200.15.6.212.14, is this a stable version and can I directly upgrade to this version or do I need to do sequential upgrades as there are 19 upgrades in between.

Regards/Rajiv

 

This didn't answer whether I could upgrade directly to the suggested version or need to upgrade sequentially to move on to the recommended version.
 
Regards/Rajiv  

Hello @rajivnandra ,

Thank you for the response.

we would suggest you to please upgrade the Access points to the recently released version 200.15.6.12.304.

Please follow the below RUCKUS Lennar Knowledge base self-help article which will help you to upgrade the Ruckus AP to a recommended version 200.15.6.12.304

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Upgrade-process-of-the-RUCKU...

Please let us know if you have any queries in this regard.

Thank you for your patience and understanding.

 

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

Hello @rajivnandra ,

Thank you for the response.

Really apologize for the confusion.

You may directly upgrade it to the 200.15.6.212.14 through the online upgrade option.

Please follow the below RUCKUS Lennar Knowledge base self-help article which will help you to upgrade the Ruckus AP to a recommended version

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Upgrade-process-of-the-RUCKU...

Please check and let me know if you have any queries in this regard. 

Thank you again for your patience and understanding.

 

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.