Lennar Home Ruckus Switch Bad Software

[Jphilbin38]

Saw your thread on fixing the switch with a computer, usb c to port cable, downloading a terminal application and entering commands to determine what version is running and trying to make the spr primary. I entered in the code from your comment and got " error. No such file or directory. 

Unable to find ufi image copy from please reload master with appropriate UFI image to proceed with flash flash copy. 

Could you help me with this? 

[Jayavidhya]

Hi @Jphilbin38 

Greetings of the day,

Thanks for the detailed description,

Please try to access the switch using the CLI method and check whether you are getting the same issue or not.

How to console in the ICX-7150-C12P

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-71...

Once you gain access to the switch please share the output of the following commands.

enable

Show version 

Show flash

Please let us know if you have any queries in this regard.

\

Best regards,

Jayavidhya

Lennar Home Community

[Jphilbin38]

ICX7150-C12 Router#enable
Incomplete command.
ICX7150-C12 Router#show version
  Copyright (c) Ruckus Networks, Inc. All rights reserved.
    UNIT 1: compiled on Sep 23 2019 at 00:00:25 labeled as SPR08090d
      (32539748 bytes) from Secondary SPR08090d.bin (Non-UFI)
        SW: Version 08.0.90dT213
      Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
       Compiled on Thu Jan 31 07:08:55 2019

  HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module
      Serial  #:FEK3841R0W7
      Software Package: ICX7150_BASE_L3_SOFT_PACKAGE
      Current License: 2X1G
      P-ASIC  0: type B160, rev 11  Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
 1000 MHz ARM processor ARMv7 88 MHz bus
 8192 KB boot flash memory
 2048 MB code flash memory
 1024 MB DRAM
STACKID 1  system uptime is 22 day(s) 1 hour(s) 19 minute(s) 3 second(s)
The system started at 00:19:39 GMT+00 Sat Jan 01 2000

The system : started=cold start

======================================================================================
===============       WARNING: FI image is not booted from UFI!!!      ===============
======  Please download UFI image and reboot the system for full functionality  ======
======================================================================================
ICX7150-C12 Router#show flash
Stack unit 1:
  NAND Type: Micron NAND 2GiB (x 1)
  Compressed Pri Code size = 28660224, Version:08.0.90dT211 (SPS08090d.bin)
  Compressed Sec Code size = 32539748, Version:08.0.90dT213 (SPR08090d.bin)
  Compressed Pri Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
  Compressed Sec Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
  Code Flash Free Space = 1260417024
ICX7150-C12 Router#

[Sgatjens]

Hi @Jphilbin38 

I can see that your unit is running the wrong code (router) instead the correct one (switch)  
 

CLI output:

ICX7150-C12 Router>

you can solve it with the following commands:

enable

copy flash flash secondary 

boot system flash secondary yes 

You also can check this article for more information:

Fixing RUCKUS ICX-7150-C12P Switch Routing Code (SPR) issue using Command Line Interface (CLI)

 Kind regards,

Sofia Gätjens
 

[Jphilbin38]

I tried that. And the secondary files are lost.