I am new owner to a home with 3 R510's . I need to reset them to use them with my new internet

[RK_sf01]

Hi , 

I am a new owner to a old lennar home with 3 R510's installed. 

I have a new internet connection and I need to get these R510's set up. I tried the basic steps to factory reset but I dont see the config wireless connection to proceed.

Do I need to reset all 3 r510's  at a time ? or 1 at a time or setup1 while others are powered on without reset

Please help

[RK_sf01]

Please dont ask to post pictures of all 3 , they are all same. 

Please guide me with a solution

[RK_sf01]

I tried the basic steps to factory reset but I don't see the config wireless connection to proceed.

[Jayavidhya]

Hi @RK_sf01 

Thanks for your response.

Please try to perform factory reset again ( sometimes it has to be done multiple times) and let us know the results.

Here I share the guides on how to perform the physical factory reset of the Access Points.

For physical factory reset as you have three access points you need to disconnect the cable of the two access points and leave the master access points one in connected state ( in which you are going to perform factory reset). Once you are done with the factory reset make sure everything is good and reconnect the access points back.

Physical Factory Reset of RUCKUS Access Point:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Physical-Factory-Reset-an-Ac...

Ruckus Unleashed Set-up using your Mobile:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Ruckus-Unleashed-Set-up-usin...

Ruckus Unleashed Set-up using Web:

https://www.youtube.com/watch?v=j8I5aVwMNMg

Password recovery setup:

https://www.youtube.com/watch?v=sqnG8fupaLk

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community