Access Points no longer working.

[ah07]

Hello,

I need some help troubleshooting my access points that are no longer working. Wifi has become slow and in some places throughout the house non existent. 

Product Name: 12-PRT POE+ COMP 2X1G SFP+

Product Family: ICX Switches

Product Code Part: C12P

[Imran_ruckus]

Hi @ah07 

Thank you for the response and the information you shared.

Could you please share the CLI output of the below commands?

enable

show version

show flash 

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[ah07]

This is show version

This is show flash

[Imran_ruckus]

Hi @ah07 

Greetings!!!

Thank you for the response and the information you shared.

I see your Switch is now upgraded to the suggested 8095g version on the primary partition. However, on the secondary partition you still have the old version. Please enter the below commands to copy the same upgraded version on the secondary partition as well.

Please Enter the below commands:

Note: Hit Enter to accept each command 

enable

copy flash flash secondary 

Example: 

VIDEO LINK AS REFERENCE: https://www.youtube.com/watch?v=Eem1IBgYaWc

telnet @ICX7150-12P Switch>enable (hit enter to accept the command) 
telnet @ICX7150-12P Switch#copy flash flash secondary (hit enter to accept the command and wait: until the flash finished) 

Once you complete the above process, please check the Internet connectivity and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[ah07]

I ran the commands and it updated. But the access points are still not working. What is the next step?