dm raw-packet-debugging mode assistance

[johnpenaflor]

Dear Admin,

please assist due to our dm raw-packet-debugging mode doesn't provide any output. see the details below.

UNIT 1: SL 1: ICX7150-48PF-2X10G_2X1G POE 48-port Management Module

Command Output

Switch1#dm raw max 20
Switch1#dm raw mode brief
Switch1#dm raw
Raw packet debugging is on now
Switch1#
Switch1#
Switch1#

[Mayank]

Hi Johnpenaflor ,

To stop you can open another ssh session and run undebug all, that will stop all debug to the debug destination ssh x .Or you can also try Ctrl+c to stop

Thanks

[Chandini]

Hi Johnpenaflor

Thank you for reaching us. 

Adding to the post could you also please help us with the firmware version running on the switch ?

Thanks 

[johnpenaflor]

Hi Chandini,

our version is ver 08.0.90gT211

[happytohelp]

Hi johnpenaflor,

You are connecting via ssh session 1 while the default debug destination is console. So you can configure "debug destination ssh 1" to redirect the logs to your session.

You can type "undebug all" to stop.