Best practices timeout dot1x
Hello everybody, we are looking for bet practices about dot1x timeouts. quiet-period, supplicant, tx-period, max-reauth-req. We'd like to avoid fail of auth, and even not to have too long timers Suggestion?
RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Forum Posts
Resolved! ICX7150 with SPS08080k.bin upgrade to Stable Release SPS08095sufi.bin
Hi everyone,I’m trying to upgrade my ICX7150 switch to the latest stable firmware release.From what I’ve read, it seems that I need to update the U-Boot (BootROM) to a newer version first.However, the U-Boot image included with version 08.0.80k appe...
Resolved! Ruckus ICX 7150-C12P with 5 R650 Units – PoE Power Supply Issue
Hello,I’m using one Ruckus ICX 7150-C12P switch together with five R650 access points to set up my network. All R650s are powered via the PoE+ ports of the switch. In each AP’s management interface, I’ve set the power mode to force 802.3at.During con...
Resolved! ICX7150-48PF-2X10G internal h/w fault
We are currently facing an issue with our ICX7150-48P switch, where several ports are showing a PoE fault status. Below are the details:Issue Summary:Some ports display “internal h/w fault” under PoE status, while others are functioning normally. Por...
POE Severe Error issue on a couple of switches
Having some issues on a couple of ICX7150-24-POE switches with the POE Severe Errors. POE devices will no longer have their requests honored. There was 11 POE devices on ports 1/1/1 to 1/1/11. Port 1/1/13 is reporting Oper State Non-PD and the Fault ...
Related Self-Help
