RUCKUS ICX Switch Family

|

ICX Switches

The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.

Forum Posts

Sorted by:

ASK the Pack

ICX 7150 router/switch

hi,is there any possibility to get my ICX 7150 back into switch mode ? I had some problems after updating the switch and i just made a copy from secondary to primary boot and at that point i didn't realize that the second boot option is actually a ro...

Convert a "stack-port"

Good evening everyone, I was wondering if it was possible to use one of the two "stack-ports" for standard connections up-link. I currently have stack enabled on our 2 devices and they are stacked via the * / 3/1 interfaces of both. There is nothing ...

japan korea timezone setting

Please teach me the time setting command for Japan and Korea on the switch

40G stacking ports stayed down on two-member ICX7450 stack and after upgrading from 9.0.0. to 9.0.1c

After upgrading from 9.0.0. to 9.0.1c the 40G stacking ports stayed down on two-member ICX7450 stack and after upgrading. These were 40G modules in the rear of the unit, in slots 3 and 4. We had unit 1 module 3 wired to unit 2 module 4.Despite the ...

Resolved! RUCKUS ICX 7450-48F L3 configuration issues

HI I have a new RUCKUS ICX 7450-48F. when i try to configure L3 Virtual interface, the below highlighted command are invalid. if i try to configure a port with an ip address command is invalid.device# configure terminaldevice(config)# vlan 2 name Mar...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1