cancel
Showing results for 
Search instead for 
Did you mean: 

icx7650 Stack Ports Down

CiscotoRuckus
New Contributor II

Do icx7650's require license for stacking?  I can't seem to find the answer.  Using 40G QSFP Passive Copper cables.

device#sh interfaces stack-ports

Port Link State Dupl Speed Trunk Tag Pvid Pri MAC Name
1/3/1 Down None None None None No N/A 0 c0c5.207f.xxxx
1/3/2 Down None None None None No N/A 0 c0c5.207f.xxxx

device#sh license
Unit License Name L3 Premium Port Speed Upgrade Speed Ports
1 l3-prem Yes NA NA NA

 

Thanks

1 ACCEPTED SOLUTION

CiscotoRuckus
New Contributor II

Problem resolved.  Both devices needed 

rear-module stack-40g

View solution in original post

2 REPLIES 2

BenBeck
Moderator
Moderator

Stacking does not need a specific license. You can find ICX7650 stacking details here:

https://docs.commscope.com/bundle/fastiron-08095-switchstackingguide/page/GUID-53B3025F-9BE9-4A78-B0...

Supported optic details can be found here:

https://www.commscope.com/globalassets/digizuite/61722-ds-ethernet-optics-family.pdf

Do you know exactly what SKU of cable you purchased? We will want to make sure it is supported for stacking (see page 5 of optics guide for 40Gb)

 

Ben Beck, RCNA, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

CiscotoRuckus
New Contributor II

Problem resolved.  Both devices needed 

rear-module stack-40g