RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
We loaded image 10.0.10a on a core ICX7650 single unit switch (originally running version 08095j ), upgrade was successful and all settings converted OK from switch to router however most of the connected access switches (Ruckus, Cisco) lost connecti...
In cisco, the configuration is displayed such that interface is displayed first and vlan tagging or untagging is secondary.Is there a command in ruckus so that I check the vlan tagging based on port, especially for the show run?Can I enter the vlan t...
I have a stack of 2-7550zp's (running GZR08095g) using a static lag and connected to a another 7550 stack. Lag ports are 1/3/1 and 2/3/1. I've noticed that you get "normal" information when you issue "show int e 1/3/1 but issuing "show int e 2/3/1...
Why is this like this and why would I want to enable (or fix) this?
7150
