Hi,I have configured an interface on a ICX 7850 as a breakout port. However, when I attempt to statically set the subports speeds, I receive an error message that there is an optics/speed mismatch and that a 4x10 QFSP transceiver needs to be inserted...
Seeking to acquire a certificate of volatility for the Ruckus ICX 7450 to support use on a secure network.
My switch does not power on anymore since yesterday. When power cord is inserted, all lights blink once and then there is no power anymore. I also cannot connect via USB to the computer. I think my device needs to be replaced. Thank you. Please let m...
My APs are not receiving power (no lights present) after the ICX-7150-12CP switch was disconnected from power, the switch has two lights present (see attached picture). I read through similar posts on here and followed steps to console the switch wit...
Hi there, I bought a no break to avoid switch corruptions in the future but wanted to check how can I safely turn off the switch ICX7150 and later turn on after I connect it to the new no break. Is there someone who can help me make the procedure in ...
