RUCKUS ICX Switch Family

|

ICX Switches

The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.

Forum Posts

Sorted by:

ASK the Pack

Stack of ICX-7250's see's unit 2 rebooting on it's own while running SPR08090d.bin (UFI) SW: Version 08.0.

Has anyone seen the issue where a stack of ICX-7250's see's unit 2 rebooting on it's own while running SPR08090d.bin (UFI) SW: Version 08.0.90dT213? If so did upgrading the code to a higher version SPR08090K.bin (UFI) resolve the issue or did you ha...

Ruckus ICX AAA

Hello, I have configured Authentication/Authorization on my Ruckus ICX 7150 swithes via AAA (Tacacs+(Cisco ACS)). Authentication/Authorization works fine via SSH, but as I have discovered console doesn't work anymore. I connect the cable to console p...

Resolved! CLI command to verify if I'm booted into the primary flash or secondary flash - Ruckus ICX 7450 ?

Hi all, I'm new to ruckus devices and trying to get my head around the CLI commands, etc. Is there a CLI command to verify which partition I'm booted into?

Resolved! ICX-7150 9.00.10 Web Service

I have just upgraded my ICX-7150 stack to release 09.00.10 from 8.0.95d and the Web interface has disappeared. If I do an nmap scan neither of the ports is open 80 or 443. Any ideas for things to check? Can I force the servers to start manually? ...

Not Receiving Inbound Traffic on RSPAN Destination

Hello. I have rspan setup, but noticed on my workstation running Wireshark I'm only receiving outbound traffic from the source device. Without luck I've tried rspan source monitor-both eth 2/1/20 as well as rspan source monitor-in eth 2/1/20 AND rs...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

4

2

1

1

1