pls help..already use file SPS08080f.bin....SPS08090d.bin....SPS08095kufi.bin...SPS08095jufi.bin...still got error and failed....got this when printenv ICX7150-Boot>printenvbaudrate=9600ipaddr=192.168.1.4serverip=192.168.1.5netmask=255.255.255.0gatew...
Dear Colleagues,I have a couple of ICX 7250, all configured quite similar. On one of them radius authentication stopped working. I just can't login by using my AD credentials anymore. Only local auth is working. I checked on the Firewall and saw that...
Hello.How do I configure route-only whe interface e 1/1/x was vlan 1 member, and int ve 1 had ip address?example configuration is below.Router(config)#ip dhcp-client disableRouter(config)#no ip dhcp-client ve defaultRouter(config)#show vlanTotal PORT...
i am trying to tinker with vxlan settings, and following this article: https://docs.commscope.com/bundle/fastiron-09010-l2guide/page/GUID-68DD54AE-D4CA-4102-BA43-FA860C7B38CC.htmlam stumbling at the start -- the 'overlay-gateway' command seems to be ...
Heads up!If Upgrading from 8040a/b to 8095 and later on ICX7250 First, go to 8080f non-UFI, (boot code and then image) reload, and then the ICX7250 8095 should be ready to go to 8095 and later.The boot code won't show up on the "show flash" output th...
