I am running ICX7450's and some of our switches were pre-maturely upgraded to 08.0.92.
I would like to know if it is possible to migrate the OS from 08.0.92 [backward] to 08.0.90.
Has anyone tried this before? Is there a procedure for this?
just yesterday I updated a Testswitch (7250) from 08.0.95 to the 09.0.10 Software Version.
In before I read the Release Notes and saw that the Privilege Login Mode is deprecated in Version 09.x.x.
After looking through the configurat...
vlan 80 name untrusted by port untagged ethe 3/1/3 ip access-group untrusted in
interface ve 80 ip address 192.168.80.2/24ip access-list extended untrusted enable accounting
sequence 10 permit tcp any 192.168.0.0/1...
I'm trying to write changes to new configuration on ICX7150-C12p but I receiving this message:
flash_fcreat: Failed to create file startup-config.txtError - failed to create startup-config.
After reboot, all the changes are gone. Is this a...
I did an upgrade ICX7150 to SPS08095e to a few switches but the old bootrom remained on some of them.
telnet@ICX7150#show flashStack unit 1: NAND Type: Micron NAND 2GiB (x 1) Compressed Pri Code size = 31457280, Version:08.0.95eT211 (S...