RUCKUS ICX Switch Family

Ruckus Wireless

|

ICX Switches

The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.

Forum Posts

Sorted by:

ASK the Pack

ICX 7250 stack switches rebooting

I updated to 8090 UFI on my ICX 7250s in most of the stacks unit 1 stays up but units 2 and 3 show that the have restarted sometime recently. Found this because my AP report disconnected but the monitor still thinks the stack it still up.Just a few e...

Need to block Apple TV discovery across WAN links

I have a ICX 7450 and multiple ICX 7250s connected using OSPF on a layer 2 WAN. Many of the sites have Apple TV devices. Locations are able to see the Apple TV's from all locations. Therefore, I need to block this discovery and keep it contained a...

How to perform a hard reset on icx 7450?

How to perform a hard reset on icx 7450? I tried this procedure but it did not work: 1 Remove power from the switch. 2 Press and hold the reset button and apply power to the switch. 3 Release the reset button after all of the system LEDs fla...

DHCP server created on switch can't bind IP address

Hi,I have an ICX6610 that I wanted to test some subnets on an SRX 240 firewall. On my SRX I have an interface that's configured as a DHCP client. If I connect a cord between that port and another switch that has DHCP from an SSG firewall, I get an IP...

ICX-7150 (08.0.90b) - LACP/LAG Layer3+4 hash algorithm support ?

Hello,I'd like to ask if ICX-7150 switches do support Layer3+4 hash algorithm in LACP/LAG. I'm connecting them to linux servers (2-4 NICs) using 802.3ad bonding. I tested Layer2+3 and Layer3+4 xmit_hash_policy on linux and traffic seems to be working...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1

1

1