The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
How do you show the arp table on a ICX 7450 running 08.0.30q ?Our previous version: 07.3.00j that ran on the FCX 648 you could simply issue a "sh arp" command.
First of all, great product and great community! Thank you!So today I went out and bought another ICX switch (7150-c12p) and would like to use it on another room. It is running the router image (layer 3)My core router has two vlans: vlan 30 (users) a...
I'm in a phase where all vlans work correctly and I'm trying to use the uplink ports to reach my router.Here are the relevant parts of my current config:lag ge static idports ethe 1/2/1 to 1/2/2vlan 30 name usersuntagged ethe 1/1/1 to 1/1/12router-in...
Hello, so today as part of my learning I tried to connect a wi-fi router to my network. After a little while all the vlan was down. Looked into the running config and saw that the port had an ip assigned and also a route was placed for 0.0.0.0/0 whic...
We have a 7750 as our core router and remotes sites with either a 7750 or 7450 as their router. The configurations were set up by an outside vendor and they only answer about half my questions.The core 7750 has routes something like:ip route 10.10.0...
