We have a network with ICX7250 switches and loop-detection activated on ports. On some Delta equipments (for furnace control), when it have a power outage, the switch detect a loop and shutdown the port. The port come down when the power is lost, n...
Hello everyone,I cannot get my switch to boot. I've tried re-flashing the uboot and the software via TFTP, which flash successfully. But but I run into errors each time I try to boot. I believe it might be completely bricked. Please assist if possibl...
I have a 2 member 7450 stack and I need to install an ICX7400-4X10GF module into each unit in the stack. I know each switch stack unit needs to be powered off to insert the module, but my question is: Does the entire stack need to be powered off and...
Needing a little help here please. We have an environment with no router, but we do have a layer 3 switch. Please refer to the diagram; we have a server with IP address 192.168.1.3 connected to Ethernet port 1 of the Brocade Ruckus ICX 7150 switch....
Can't login using AAA radius to a ICX 7450-24. It displays the error when enter credentials and press return/enter : access denied by radius server. What should I set on radius server to get the AAA authentication working please
