ICX Switches
The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! ACL Adding a access-group to a interface not selectable ??

Hello,  I believe this to be a CLI command line bug.I have done this before successfully but can't remember how you do this Config:ip access-list extended 100remark Block_CapWapsequence 10 deny udp any any eq 5246sequence 20 deny udp any any eq 5247s...

JayWM by New Contributor
  • 5500 Views
  • 3 replies
  • 0 kudos

2 x 40G LAG on ICX7550 100G ports not allowed?

Hi,Yesterday I was trying to configure a LACP connection using two QSFP+ DAC cables between a Brocade VDX 6740 and an ICX-7550-24ZP. The VDX was no issue to configure, but on the ICX I ran into issues specifying the port-speed. I disabled stacking on...

zotacno by New Contributor
  • 2972 Views
  • 2 replies
  • 0 kudos

SSH unattended commands & ssh certificate login

I figured how to send commands to an ICX switch directly from the SSH command. Like so from Powershell on a Windows System:"conf tenable acl-per-port-per-vlan" | ssh user@switchHowever I don't get any output from the switch, so I can't see the result...

blanalex by New Contributor II
  • 1642 Views
  • 0 replies
  • 1 kudos

Resolved! Unleashed portal conflicting with switch web interface

Hi everyone,I have a ICX7150-C12 with two APs (via DHCP) that is connected to a pfsense router.The router has the IP 10.23.1.1 and the switch shows the IP 10.23.1.2 when I log in via the console port. In unleashed the switch is shown as 10.23.10.2. E...

Announcements

Welcome to RUCKUS Community!

Please be sure to read the Community Guidelines before posting.

Please visit the Help FAQs if you are new!

Lennar SmartHome Customers

Please visit our Lennar Knowledge Base for quick answers to common issues before posting to the forum.