ICX Switches
The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Incorrect ECMP behavior

I've got a 7150 stack running the 09.0.00 'routing' firmware (yes, I know it's not GA, but with 08.x.x I had serious problems with IPv6 routing). I have OSPF enabled and there are two connected nodes which publish the same destination via OSPF (an...

kpfleming by New Contributor III
  • 700 Views
  • 0 replies
  • 0 kudos

Resolved! ICX 7150 c12p - AP with multiple VLANs

Hi, I've not been able to find an answer for this. I have multiple VLANs on being tagged by my Access Point (R610 for now, will get more later): default (50) default-iot(200) The AP is connected to an 7150 (PoE), and when I try to tag multi...

How to remove 802.1x on specific Interface

Hi All, I have some problem as I mention in title. I already try to remove as below instruction but didn't worked.  please share correct solution for my case. Thanks you and looking forward your advise . 

Image_ images_messages_615fd65cede20131f3b43384_db413b478f636b3d4d511951f817b020_802.1x-87c76023-8d59-422e-ac9b-eace097417c1-1653439470.JPG
ye_zey by New Contributor II
  • 799 Views
  • 0 replies
  • 1 kudos

0x43 illegal class reported by PD

I have 2 Ruckus ICX7450-48P switches that are having similar issues with POE. I'm receiving "illegal class reported by PD". The lights on the POE devices blink on and off continuously.  So far I've tried 4 different Unifi Access Points and one IP Ph...

jt5066876 by New Contributor II
  • 3500 Views
  • 10 replies
  • 1 kudos
Announcements

Welcome to RUCKUS Community!

Please be sure to read the Community Guidelines before posting.

Please visit the Help FAQs if you are new!

Lennar SmartHome Customers

Please visit our Lennar Knowledge Base for quick answers to common issues before posting to the forum.