Solved: Re: ICX Switch is Connecting - Page 2

flo253 · ‎08-13-2023

Why is this like this and why would I want to enable (or fix) this?

Zairah · ‎08-14-2023

It seems ssh is not enabled on the switch. Please try enabling ssh on the switch using cli.

Contact us via chat, comment that you already have a post that we have approved the RMA for you, copy the link from this post and paste it into the chat to initiate the unit replacement.

Regards,

Zairah Javeed
Sr Technical Support Engineer | L2 TAC Wired
support.ruckuswireless.com/contact-us

COMMSCOPE
now meets next

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS

View solution in original post

happytohelp · ‎08-20-2023

Hi flo253,

You would need to console (or telnet) into the switch and run these commands on the CLI.

Please refer below link to connect to switch using console:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-71...

flo253 · ‎08-29-2023

I have installed the new switch. Will it always say switch is connecting and disconnected on the right hand side?