CommScope RUCKUS Community Forums

naoki_sato · ‎04-06-2023

I found some mistake in "RUCKUS® ETHERNET OPTICS" document.
I'm sure that ICX7550 and ICX7650 do not support 25G transceivers.
- E25G-SFP28-SR
- E25G-SFP28-LR

RUCKUS® ETHERNET OPTICS
https://www.commscope.com/globalassets/digizuite/61722-ds-ethernet-optics-family.pdf
or, have a plan to release new 25G optional modules?

Chandini · ‎04-10-2023

Hi Naoki_sato

I checked with regard to the concern you have again internally . I do agree that I did mention the below information

"

Thank you for reverting back to us. I did check internally with regard to the questions you mentioned above.

The 25G are SFP28 which will be used in SFP+ ports to be supported on the 7550-24F and 48F and in 7650 48F Model.

Support to be added in firmware above 10 series but it's still tentative and under review and testing

I hope this information helps

"

I got a update again today and looks like it was a mistake in the docs and you are right about it.

The optics docs had few details mentioned incorrectly about SFP28 support , the 7550 & 7650 do not support 25G optics. we are rectifying it from our side. Sorry about that.

Thanks for pointing that out.

View solution in original post

CommScope RUCKUS Community Forums

I think unsupported 25G transceivers are "checked" to ICX7550 and ICX7650 in Optics Datasheet.