ICX Switches
The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

7150-48zp ICX 10.0.10f_cd1 vs 09.0.10j_cd6

Commanddevice# configure terminal device(config)# ipv6 multicast flood-unregisteredis not available on either 09.0.10j_cd6 or 10.0.10f_cd1 on the 7150-48zp as suggested in the respective linked RUCKUS FastIron IP Multicast Config GuidesMulticast Disc...

vesalius by Contributor
  • 99 Views
  • 0 replies
  • 0 kudos

Resolved! ICX-7150 firmware mismatch

Hello,Will a stack of ICX-7150's run if the firmware is mismatched? I intend to perform a network firmware upgrade and may not have access to all the switches in the stack and on the network in the same day. Will the switches still communicate if the...

jwray26 by New Contributor II
  • 499 Views
  • 4 replies
  • 0 kudos

ICX 7650-48F Fail in HW init

I have an ICX 7650-48F unit that is constantly rebooting.I have attempted a soft reset which resulted in an indefinite initializing state (sys LED blinking green).I have also attempted recovery procedure which resulted in no success.Below I have past...

JoeJMWCI by New Contributor II
  • 1300 Views
  • 5 replies
  • 0 kudos
Announcements

Welcome to RUCKUS Community!

Please be sure to read the Community Guidelines before posting.

Please visit the Help FAQs if you are new!

Lennar SmartHome Customers

Please visit our Lennar Knowledge Base for quick answers to common issues before posting to the forum.