Help: Log Into ICX-7150C12

[Gordo_GT]

Hi, 

I attempted to set a password on the switch by using the CLI connection on a Mac, but for some reason, I can't make the password update stick nor am I able to login when accessing the switch IP address on a web page. Any suggestions? Current firmware is 08.0.70bT211

Here is where I am at within Terminal:

"ICX7150-C12 Switch>

  enable            Enter Privileged mode

  nslookup          Nslookup Utility

  ping              Ping IP node

  show              Display system information

  stop-traceroute   Stop current TraceRoute

  traceroute        TraceRoute to IP Node

ICX7150-C12 Switch>enable

No password has been assigned yet...

ICX7150-C12 Switch#"

[Gordo_GT]

I solved the issue by following steps 1,3, and 4 of the linked site: https://luiscachog.io/configure-ruckus-switch/. Next topic, what guide may I follow to update the firmware on the switch?

[happytohelp]

Hi Gordo_GT,

Since you're currently on 8070b, you will have to perform a step upgrade. You can follow below document:

https://docs.commscope.com/bundle/fastiron-08095-upgradeguide/page/GUID-5DD7EE86-6988-4CA7-81D2-22EA...