I have an ICX edge switch connected to Core using 802.1w. I need to uplink another extreme switch to the existing ICX edge switch. Vlan 900 is configured on the extreme switch this vlan has configured with spanning-tree 802.1w and stp for point to point link to core on the ICX switch.Currently when RSTP enabled on extreme switch I am getting BPDU Errors:-
STP BPDU Drop messages flooding the logErro:STP.
InBPDU.Drop Port=24 ! STP Port is disabled!
Is there some additional configuration required on iCX switch to stop the BPDU errors ?
I understand what needs to be configured between Core and Edge switch but I am still unclear what the correct config is connecting Edge to Edge when daisy chaining switches using a lag or just an access port.
Also what the difference between applying the admin-pt2pt-mac on a vlan as opposed to interface ?