RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Hi everyone, We’re excited to share that the RUCKUS Community Forums will be migrating to a new platform during the week of August 10–17. This move is part of our ongoing effort to improve the member experience and make it easier to find information,...
Welcome to the RUCKUS Pack! The RUCKUS Networks Community is a place to ask questions, resolve issues, learn, exchange ideas, and connect with your peers. The Pack includes a diverse range of members who are passionate about sharing and collaborating...
When I try to connect the R500 AP to the SZ-100 E controller. In that case, that particular AP's mesh role is turned down to the disabled state. Then I checked the scg configuration through the AP's CLI mode, as per the "get scg" command AP indicate ...
Hi Sir,I have topic here. I have a question in my mind. The question is without wireless controller can configure wifi mesh ? Thank you.
Hello, I have a rather embarrassing problem that I can't solve. My goal is the following: I want to make my Wi-Fi AP 2 SSIDs on 2 different VLANs. I have configured the switchs (default VLAN: 1, tagged VLAN: 20, 30).I have also configured the firewa...
We are an MSP with hundreds of Ruckus WAP's deployed and we keep receiving emails from the Ruckus NOC with the subject of "ACTION REQUIRED: Ruckus Cloud has detected devices are out of compliancy". The email goes on to provide a list of the router/fi...
Hello! I want to upgrade our 5.1.2 2xvSZ+2xvDP to 5.2.1 latest. But I found from SZ-5.2.1-UpgradeGuide-RevA-20200731.pdf on page 23 this note: "For remote APs connected over a VPN, the tunnel MTU must be reduced to 1400 (acceptable range is: 850 th...
