cancel
Showing results for 
Search instead for 
Did you mean: 

enabling DHCP server on standalone AP

paul_4gzwo1u6ep
New Contributor II
Hi,

I want to enable DHCP server on an R310 AP, the AP has a static IP address of 10.20.1.5, subnet 255.255.0.0. I know I need to enable a local subnet to enable DHCP, but am not sure what to use as 'local IP address' & 'Subnet mask' on the subnet entry screen. Can I just use the static IP of the AP with same subnet mask, and can I just use  access VLAN as 1
2 REPLIES 2