cancel
Showing results for 
Search instead for 
Did you mean: 

7762 configuration for range and coverage

moustapha1_ahma
New Contributor
I’m facing a small issue with my outdoor kit. I have successfully managed to setup the AP 7762 with a ZD1106.

However configured to operate at full power, mounted on a balcony, I’m not able to get a signal as I walk beyond 25-30m.

Could you advice the right setting to use to configure for range/coverage? What data rate can theoretically be achieved at various ranges?
3 REPLIES 3

judy_baxter
New Contributor
Did you install ZoneDirector? It should adjust settings automatically, otherwise looking for right channel assignments is too time-consuming.
website

john_d
Valued Contributor II
Is the mounting orientation correct?

michael_brado
Esteemed Contributor II
7762 is designed to be mounted with the Dome down.
Labels