Access Points - Indoor and Outdoor
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

P300 vulnerabilities

Hi, I have a client with some P300 devices, they work correctly, but the problem is that they are presenting some vulnerabilities in each one of them. For example:DescriptionThe remote host supports the use of RC4 in one or more cipher suites.The RC4...


Hi, I have an issue with APs r310, r600, zf7982 and zf7372In our environment we have implemented 472 AP, 333 in zone 3.6 ( zf 7982, zf 7372 and others) and 139 AP in zone 5.2 (r310, r600 and others).All APs are monitored with PRTG- SNMP, recently som...

R750 poor performance on 2.4 GHz

Hi,In an AP group we have five R750, one R550 and two R710 access points.ZD 1200 with latest firmware is the controller.All are connected with Ruckus 2.5 G supported POE+ switchInternet connection is of 100 Mbps CIRSurprisingly, when connected on 2.4...

510 in reboot cycle after power outage

510 in reboot cycle after power outage.1. PWR will blink and eventually turn solid green2. CTR will slow blink, then switch to a rapid blink3. PWR will then turn solid red.Everything was working fine until the power went out for 8 hours.  Any recomme...

Jbails7 by New Contributor
  • 8 replies
  • 0 kudos