RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Device(s) constantly rejoining in short time frame

In my event/activities log, i'm seeing a device joining multiple times within without any disconnect message, like the following 2014/02/13 13:53:49 Low User[4c:8d:79:e4:bf:5e] joins WLAN[WLAN1] from AP[zf7962-01] 2014/02/13 13:51:54 Low User...

Ruckus Zone Director 1100 with 3 AP zf7341 working on MESH - Performance issues observed

We have setup Ruckus Zone Director 1100 with One AP zf7341 as root AP and other two AP zf7341 on MESH. RuckusAP-Main- zf7341-Connected (Root AP) RuckusAP-01 - zf7341 - Connected (eMesh AP, 2 hops) RuckusAP-02 - zf7341 - Conn...

Web interface on Zonflex 7363 slow to load

For some reason when I access the web interface on my zoneflex 7363 and click on 1 of the wireless SSIDs under configure the page takes about 5 minutes to load. Anyone experienced this before?

ssid visibility ZF 7321

Hello I've bought AP a few month, all work correct . Now I have a problem with SSID visibility. When I choose 2.4 GHz Wireless Mode and reboot device, SSID is disappear, then I'm switch it to 5 GHz Wireless Mode and is stays visible and clients can c...

How to view standalone 7363 configuration via AP CLI?

Can anyone tell me the CLI command to view AP's configuration, similar as show running-config in Cisco IOS?

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1

1