RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Ruckus 7372 standalone with multiple SSID and VLANs

Hi, Can a standalone Ruckus 7372 have two or more ssid's on different vlans? I would like Eth1 to be a trunk and have the two vlans bridged to my LAN where they will share a dhcp server etc. I'm aware you can achieve multiple SSID to VLANs by have...

When is SmartMesh for the T300 available?

Have a network where there is an 11g bridge that needs to go. Awaiting SmartMesh on the T300 to solve the issue. as the 11g bridge is bottlenecking everything on the far side.

Slow connections from zf7982

Hello, I'm relatively new to ruckus gear. We have 30 zf7982s in 3 non-overlapping areas. The short version is that i'm only getting 11g speeds even when clients connect at 11n (2.4 or 5ghz). I've taken an ap and restricted it to 11n mode but that...

Will R500/R600 support meshing?

I've noticed that SmartMesh support is curiously lacking from the R500/R600 data sheets. Am I reading too far between the lines that unlike the T300's and R700's, the R500/R600 will not support meshing?

Issues configuring VLANs on Single AP Deployment of 7372

Hi Everyone, As a preface, I worked with Ruckus support directly on this issue and the tech stated that my configuration looks correct and it might be the AP, but I am having this issue on another AP as well. In short, when attempting to connect to...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1