cancel
Showing results for 
Search instead for 
Did you mean: 

AP ZF7982 disconnected

jayne_chin
New Contributor
I have a ZD1200 with 16 APs connected. It has been working for awhile and suddenly half of it got disconnected. Can you advise some troubleshooting steps. ZF7982 & ZF7372. Controller has been restart and poe switches has been tested. No issue on switch. But AP remains disconnected. Need urgent advise
3 REPLIES 3

rahul_sharma_73
New Contributor II
how many AP's licensed at your controller.

monnat_systems
Valued Contributor II
I think i will check the following:

DIR LED status on the AP?
How is then network different from where other AP is/are working?
what does the controller states in event and activities for the disconnected AP's?
Are you able to ping the disconnect AP?

jayne_chin
New Contributor
Hi Rahul, there is 16 AP license at the controller

Hi Monnat, to answer your question
- the LED status is on
- the are on the same VLAN1 whether is it working/not
- it just states that the user fails to join the WLAN
- yes we can still ping

We manage to get all the AP up yesterday by upgrading the firmware.

But this morning, all the AP are disconnected again. We are troubleshooting to see what went wrong again. Please advise us on the possibility.