RUCKUS Indoor and Outdoor Access Points (APs)

Ruckus Wireless

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Ruckus R500 firmware v100.1.0.0.194 has no set/get band-steering option?

I've got a lone R500 I'm trying to configure band-steering on but with the latest firmware there is no set/get band-balancing from CLI.If I downgrade to 9.8, there is a set/get band-balancing from CLI, but no matter what I set the 2.4 or 5 radio RSSI...

two mac addresses for each Ruckus AP on the LAN interface

Why do I see 2 mac addresses for each Ruckus AP on switch ports ?I expect only 1 mac address for each AP on the LAN interface.ie:VLAN 102 AP MAC e0:10:7f:08:e0:f0 switch port gi7 dynamicVLAN 102 AP MAC e0:10:7f:08:e0:f3 swit...

Ruckus 7363 proper setup for 230 users

HelloI borrowed a 7363 AP for an event that will have 230-ish users connected at the same time. Internet will come from a 200 Mbit Zhone ONT with DHCP.Since the 7363 was used, first I reset it to default settings; I'd like to have it working with the...

Alternate rate limit configuration on a Zonedirector

I need to define different rate limits for clients on my Zone director. 5Mbps for each client during the day and 10Mbps during night. How do I define it ?I use Ruckus ZoneFlex APs.Please advise

R300 & R500 WAP installed have the same SSID. How can I get mobile devices to connect to the WAP with the best signal automatically?

Hi. I have an R300 & R500 WAP installed at a site to stream audio. Both have the same SSID. Does anyone know how I can set them up so that the customers mobile devices will connect automatically to the WAP with the best signal? (Roaming?)

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1

1

1