Restrict user to 1 connection in Zero-IT Activation
I'm OK with the Zero-IT set up. What I would like to know is, is it possible to restrict a user who authenticates via AD to only 1 or 2 device activations? Thanks
Forum Posts
r500 can't connect to the internet
Hi,I've got a Problem with my r500.We are using multiple r500 AP's and an ZD1200.But one of the AP's can't connect to the Internet, To test the ap I upgraded her to the unleashed Firmware and it works, so I downgraded it again and now I can't dinf th...
Unable to find the SSID R500
Hi I recently deployed 3 standalone ZoneFlex R500 AP's in the following ConfigurationCISCO Router: 192.168.1.1MAC Mini: 192.168.1.2R500 - 1: 192.168.1.3R500 - 2: 192.168.1.4R500 - 3: 192.168.1.5And now the Customers are unable to see the SSID for few...
ZF7731 PTP Connection getting dropped irregulary
Hello,Have 3 x IP Cameras connected to a ZF7731 bridge connection of around 600m, distance in the config is set to 1Km.I ran the Channel Optimizer during initial setup and SmartSelect is enabled on Root bridge.Performance was excellent during initial...
Can you use a ZoneFlex 7343 Access Point to create a wireless bridge?
I need to install an IP camera into a shed on our site and we have a Ruckus ZoneFlex 7343 Access Point going spareThe site already has wifi and so I was wondering if there is a clear guide how I can use the 7343 to connect my ip camera to the rest of...
Related Self-Help
