RUCKUS Indoor and Outdoor Access Points (APs)

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Ruckus Wireless

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Mesh APs not working after a Failover

Good day! Our topology consists of two Zone Director 1200 : One as a primary and the other one as a secondary. Ive configured the smart redundancy in both controllers, making the primary active and secondary as a standby. We have wired aps, that are...

vSZ-E with R510 - Maximum clients

Hello, based on KBA-4666 I would like to know if anyone knows the values for R510 which doesn't appear on the table. I have a Virtual SmartZone Essentials with R510 APs, is that table applicable on this scenario?

[960 License threshold exceeded][AP Capacity License] limit reached at [90%].

Im new to the Ruckus environment, i tried doing a search and nothing came up.The previous employee left this solution with 2 AP's setup. I'm trying to setup the rest of them with limited knowledge.Smartzone 100 using Zoneflex R610 AP'sDoes this have ...

zf 7762-s stand alone configuration

HiI have a ZF7762-s AP, which I upgrade it with firmware 9.8.3.0.14 for stand alone purpose,but the option wireless where I can configure new SSID didn,t appear.

Why do R720 POE Port show two MAC addresses?

We have a NAC solution on my network and I recently deployed a few R720's. I noticed that all ports where the 720's are connected show two MAC addresses. I compare the MAC address entries for all other AP's and they all show one MAC. Port Gi1/0/44...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1