I would like to know if there is a way to isolate all guest devices connected through cable to H510 ethernet ports (LAN1 - LAN4) in the same way as it can be configured for WLAN (by Wireless Client Isolation / Isolation Whitelist) ?I want to ensure t...
Hi guys any help with setup, Logged in to set up the wireless but could not find where to enable the radio to set up my wireless, attached screenshot if anyone can help .planning on using it as standalone AP
I'm using a service for radius authentication (IronWiFi), and like most of these providers, they charge on a per-AP basis. Out of 7 APs, we only use 1 (lobby area) for guest access. Currently, they have detected 3 APs based on the requesting MAC ad...
We have a Ruckus Unleashed R600 operating with the last firmware "200.5.10.0.291'' the network is running normally but on the web interface is showing that there's no wireless clients and no Access points working.What can I do to resolve this issu...
On the download page for this product, there are several different packages:ZoneFlex Solo Access Point 104.0.0.0.1347 (GA) Software ReleaseRuckus ZoneFlex Solo Indoor Access Point 100.1.0.0.432 (GA) Software Release (.zip)Standalone AP Software 9.8.3...
